The New Knife Collector's Briefcase by Maxpedition

The Knife Collector’s Bag was developed for connoisseurs of fine cutlery as well as for the knife makers that craft them.

Product Features:

• Full clamshell opening main compartment (Approx. 15”(L) x 3”(W) x 11”(H)) with 12 clear windows (6” x 2.5”) for small folders, 6 deep pockets for medium/large folders or small fixed blades, and 2 large gusseted sleeves for large fixed blades or letter size catalogs/magazines.
• Twenty-two (22) clear windows (6” x 2.5”) for small folding knives
  
• Removable insert has 10 clear windows (6” x 2.5”) for small folders, 1 solid zippered pocket, and 1 see-thru mesh pocket for small fixed blades or misc. items. Insert attaches to bottom of main compartment with hook-and-loop and 2 brass snaps
• Outside pockets (side A) include 6” x 9” x 1.5” zipper pocket with ID window, two 3.5” x 3” x1.5” lidded pockets, one 7” x 5” x 1.5” lidded pocket
• CCW compartment (side A behind pockets) lined with 4” x 12” loop field for attachment of concealed carry firearms accessories; large D-ring pull for fast deployment
• Outside organizer (side B) has padded 14” x 10” x 1.5” with internal divisions
• Adjustable 2” shoulders strap with non-slip breathable shoulder pad
• Fits up to 15.4" (diagonal screen size) laptop computer

Spyderco Native FRN Black Blade

Engineered for the human hand, the Native's ergonomic design maximizes cutting ability while minimizing discomfort and fatigue. This model is all about combining performance and comfort. Since the portion of the knife most in contact with the user is the handle, that became key while the model was in initial development on the drawing table.

We've created a handle pattern with two separate finger choils. The first choil (where the blade and handle meet) allow positioning the index finger closer to the knife's sharpened edge for control over the cutting surface. Behind the first choil, the second positions the hand farther back on the folder for dexterous cutting while pushing the blade away from you. Bi-Directional Texturing molded into the FRN handle form varying levels of steps minimizing forward or backward sliding.

Carved out of the locking lever is a David Boye Dent insuring the lock remains safely engaged even when gripping the handle forcefully. A section of non-sharpened serrations line the blade's spine yield an additional slip resistant point for the thumb. The blade itself is hollow-ground CPM-S30V steel with a weight reducing swedge ground from the spine.

A black steel tip-up clip can be placed ambidextrously on both sides of the handle via a barrel-shaped screw that doubles as a lanyard.

The New AK-47 Tactical Folders by Cold Steel

In 1947 Mikhail Kalashnikov, the legendary Russian gun designer, created the AK-47 assault rifle. Eventually adopted by the Red Army in 1949, it became famous as the "People's Rifle". Such renown was well deserved, as it was an utterly reliable weapon. It was rugged, simple to operate and maintain, economical, and effective at reasonable ranges. This weapon, and all it represents became the inspiration for our heavy duty tactical knives, the AK-47 folders. Designed by Andrew Demko, the AK-47's possess all of the attributes of their namesake, and perhaps a few more.

They're built for hard and rugged use and are available in two sizes. Both sizes have many features in common. For instance, both are equipped with G-10 handles that offer a vigorous grip that is remarkably tough, rigid and incomparably strong. Also, each size comes with a unique pommel made out of 6061 aluminum. The pommels feature a lanyard hole and can also serve as a "less than lethal" percussion tool in a self-defense situation.

Additionally, the hollow ground blades are honed by hand until they reach levels of sharpness only seen on a surgeon's scalpel. They're made from Japanese AUS 8A Stainless steel, then vacuum heat-treated and sub zero quenched for maximum toughness. The blades are coated with black Teflon® for corrosion resistance and to enhance cutting power and to improve edge retention by reducing friction.

To compliment such exceptional blades we have paired them with our state of the art Tri-Ad® lock. In our testing, the Tri-Ad® has proved to be superior to any other lock on the market today in terms of overall strength and resistance to shock induced by blows on the spine (eclipsing virtually all locks in short order) or the even more devastating shock by over-strike that lands on the handle.

Finally, to assure easy access, and swift operation, the AK-47's come with an ambidextrous pocket clip and our new patented thumb plate. The thumb plate has a dual purpose, it allows the knife to be drawn and quickly opened by snagging it on the edge of a pocket or it can be used like a conventional thumb stud or disc for easy one-handed opening.

The New - Spyderco Bill Moran Drop Point Safety Orange FRN

Spyderco’s first fixed blade was designed by none other than the late Mr. William Moran, Master at the Forge and founder of the American Bladesmith’s Society. It was released in the 1990s and hasn’t undergone any changes since then, remaining true to Moran’s original design. The Moran/Spyderco collaboration is the ultimate outdoor camp/survival style knife. New for 2009 Spyderco offers the knife with an easy-to-see safety orange handle.

Spyderco engineers opted to use VG-10 stainless steel for the blade. Due to its extremely high carbon content and tight grain structure, VG-10 takes and holds a superior edge. The Moran-style skinning blade is 3-7’8” (99mm) with a satin finish. We’ve ground it fully-flat for high performance cutting.

The knife justly earns the name Featherweight by incorporating an ergonomic lighter than air, handle of safety orange FRN (fiberglass reinforced nylon) with black non-slip Kraton_® side grips.

It carries in Boltaron_® sheath equipped with a G-Clip clip system that attaches to a belt or waistband in a cross-draw, horizontal, inverted, vertical or small of back position.

The HellFighter LightStorm X-19

The HellFighter LightStorm X-19 with a 1.75” head offers outputs to 500 lumens and is available in both standard 12 and 9 volt lithium battery versions and new 4500mAh rechargeable systems with run times approaching nearly two hours! Waterproof, Shock Isolated, MilSpec, also available in IR versions. Export Controls apply.

Specifications:
Length: 8”
Width Head: 1.75”
Width Body: 1.0” Nominal
Weight: 11.2 oz
Material: Mil Std 6061 511 T6 Aircraft Aluminum Alloy, Body functions as heat sink.
Lamp: Xenon/Halogen/Argon High Intensity vapor-sealed, incandescent High Temperature Filament Bulb.
Wattage: 6.5 watts
Voltage: 9 Volts Nominal, 7.2 volts in rechargeable mode.
Output: 350 Lumens/250 Lumens Rechargeable
Runtime: To 1 hour, dependent on battery performance.
Lamp Mounting: Permanent Soldered, Spring Isolated Shock resistent on weapon axis to 1250G.
Lens: Optical Grade Borosilicate Glass, Iridium coated for 5500k daylight equivalent beam.
Reflector: Parabolic Shaped silver halide coated over etch-stippled finish to eliminate filament ring shadows.
Remote Switch: Pressure pad, waterproof 6 inch cable, replaces tail cap.
Power source: (3) 123 series Lithium Batteries Rechargeable, (1)3.7 volt 2400MA battery.

Tactical Gloves by Hatch

Hatch provides quality gloves and other protective gear for uniformed duty, tactical, corrections, military, industrial safety/medical rehabilitation, and more. Hatch brands include Friskmaster cut resistant gloves, Operator Tactical Gloves, Centurion and ExoTech disturbance control gear and B.O.S.S. tactical eye wear.

Goatskin glove has leather covered PVC hard knuckles which buffer sound and are not detectable by infrared. Polyknit liner, cut ring for removal of trigger finger, enlarged protection area in the heel of the palm, Ergo-Cut design, water-resistant treatment.

Hatch 1153 Operator Hard Knuckle Glove, Black, Large Features:
• Hard Knuckle Glove
• Black
• Large
• Goatskin Glove
• Leather covered PVC hard knuckles
• Polyknit liner
• Enlarged protection area in the heel of the palm
• Ergo-cut design
• Water resistant treatment
• Made In: China

The New Kodiak Gearslinger Backpack from Maxpedition.

Product Features

• Single shoulder backpack designed to maximize utility when rotated towards front of body
• Main compartment: 17” high x 10” wide x 4” thick with internal organization
• Top front: 4.5” high x 9” wide x 2” thick with internal organization
• Bottom front: 10” high x 9” wide x 2” thick with internal organization
  
• Approximate Capacity: 1100 cu. in.
• Fits up to 15.4" (diagonal screen size) laptop computer.
• Main compartment and hydration compartment can accept CCW accessories
• Shoulder strap designed to go over left shoulder for better weapon shouldering
• Bag can be worn in front and contents comfortably accessed while sitting down
• Water bottle pocket sized to fit 32oz Nalgene bottle
• Compatible with 100oz hydration reservoir
• Theft deterrent devices built-in to capture zipper pulls
• PALS modular webbing throughout to for attaching accessories
• Top and side handles

Product Materials

• 1000-Denier water and abrasion resistant light-weight ballistic nylon fabric.
  
• Teflon® fabric protector for grime resistance and easy maintenance.
• high strength zippers and zipper tracks.
• UTX-Duraflex nylon buckles for low sound closures.
• Triple polyurethane coated for water resistance.
  
• High tensile strength nylon webbing.
  
• High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
• #AS-100 high grade closed-cell foam padding material for superior shock protection.
• Internal seams taped and finished.
• Paracord zipper pulls.
• Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength.

Cleaning Instructions

• MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
• To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
  
• Do not machine wash.
  
• Do not use detergent or bleach.